You have no items in your shopping cart. Add items to checkout.
You're currently on:
HID ProxPro II Proximity Card Reader
HID’s ProxPro II proximity reader for access control combines performance, reliability, and ease of installation into a two-piece, weatherproof potted enclosure. International users will appreciate the multilingual installation manual, lower voltage requirement and flexible mounting options.
Standard Features:
• Two-piece reader design allows for easy installation.
• Available with a Wiegand or Clock-and-Data interface.
• Provides high reliability, consistent read range and low power consumption.
• Features include multicolor LED and internal or host control of the LED and beeper.
• Can be mounted to glass (using the optional glass mounting kit).
• Mounts directly on metal with minimal impact on the read range performance.
| Frequency | 125 kHz |
| Output | Wiegand or Clock-and-Data |
| Mounting | Single-Gang Electrical Box |
| Power Supply | 5 - 16VDC |
| Current Draw | Avg. 25mA, Peak 125mA |
| Card Compatibility | Typical Maximum Read Range (depending on local installation conditions) • ProxCard® II card - up to 9” (22 cm) • ISOProx® II card - up to 8” (20 cm) • DuoProx® II card - up to 8” (20 cm) • Smart ISOProx®/DuoProx® II cards - up to 8” (20 cm) • Proximity & MIFARE® card - up to 8” (20 cm) • ProxCard® Plus card - up to 4” (10 cm) • ProxKey® II keyfob - up to 4” (10 cm) • MicroProx® Tag - up to 4” (10 cm) |
| Read Range | Up To 9" |
| Operating Temperature | -22°F to 150° F (-30°C to 65°C) |
| Operating Humidity | 0-95% Relative Humidity Non-Condensing |
| Indicators (LED) | Tri-State LED & Beeper (Factory Programmed Options) |
| Housing | Polycarbonate UL 94 |
| Dimensions | 5.0"H x 5.0"W x 1.0"D (12.7 x 12.7 x 2.54 cm) |
| Warranty | Lifetime Limited Warranty |
| Brochures | prod_brochures/hid/proxpro_ii.pdf |
Card Readers
Card readers are available in short range (2"-6") or long range (up to 10'). The longer range models use similar technology to that found in a toll booth "Fast Track" transponders. All access cards have a unique access code. If the reading system has that card enrolled, it will grant access privileges.
Stand alone card readers have a built in memory of the cards and are controlled from the reader itself. Most of these types of readers have a keypad located outside or inside the cabinet to enter or delete cards. In general they do not record or track card usage.
Slave card readers are attached to larger systems such as telephone entry systems or door controllers. This type of system frequently connects to a computer where the card usage is tracked. In these systems the telephone entry, door controller, or the computer keeps the data base where users are added or deleted and what access privileges individual cards have.
