You have no items in your shopping cart. Add items to checkout.
You're currently on:
FAAC 760 Underground Hydraulic Swing Gate Operator
Accessories for FAAC 760 Underground Hydraulic Swing Gate Operator
|
FAAC 738704 Extension Arm - 2 Piece
|
$102.00
|
||
|
|
FAAC 2141 Extension Arm - 3 Piece
|
$102.00
|
The Model 760 hydraulic swing gate operator is designed specifically for underground installation in residential applications. Because of It’s power and invisibility, the 760 is ideal for large, ornamental gates.
Hydraulic swing gate operators are inherently safer than other types of operators because they have fewer “pinch points.” In addition, the FAAC 760 operator is equipped with a hydraulic bypass valve for extra entrapment protection and a manual release that allows you to operate your gate if there is a power failure. A battery back-up unit is also available.
The FAAC 760 In-Ground Swing Gate Opener is available in these models:
• 1066702.5 115VAC 2.5 Amp Single Kit
• 1066701.5 230VAC 1.5 Amp Single Kit
• 1066702.5 / 1067702 115VAC 2.5 Amp Dual Kit
• 1066701.5 / 1067701 230VAC 1.5 Amp Dual Kit
Single Kit Includes:
1 - 760 Operator
1 - 455D Control Panel
1 - 14 x 16 Enclosure
1 - Load Bearing Box
Dual Kit Includes:
2 - 760 Operators
1 - 455D Control Panel
1 - 14 x 16 Enclosure
2 - Load Bearing Boxes
Hydraulic swing gate operators are inherently safer than other types of operators because they have fewer “pinch points.” In addition, the FAAC 760 operator is equipped with a hydraulic bypass valve for extra entrapment protection and a manual release that allows you to operate your gate if there is a power failure. A battery back-up unit is also available.
The FAAC 760 In-Ground Swing Gate Opener is available in these models:
• 1066702.5 115VAC 2.5 Amp Single Kit
• 1066701.5 230VAC 1.5 Amp Single Kit
• 1066702.5 / 1067702 115VAC 2.5 Amp Dual Kit
• 1066701.5 / 1067701 230VAC 1.5 Amp Dual Kit
Single Kit Includes:
1 - 760 Operator
1 - 455D Control Panel
1 - 14 x 16 Enclosure
1 - Load Bearing Box
Dual Kit Includes:
2 - 760 Operators
1 - 455D Control Panel
1 - 14 x 16 Enclosure
2 - Load Bearing Boxes
| Operation | Hydraulic Pump w/ 455D Control Panel |
| Power Source | 115VAC 2.5 Amp or 230VAC 1.5 Amp |
| Max. Gate Weight | 13' x 1,760 Lbs Per Leaf |
| Max. Operating Speed | 90° in 12 - 17 Seconds; Max 148° |
| Battery Backup | Optional |
| Max. Duty Cycle | 30 Cycles per hour |
| Operating Temperature | -33F to 165F |
| Dimensions | 19.25"L x 10.25"W x 6.25"D |
| Warranty | 2-Year Limited Warranty |
| Brochures | prod_brochures/faac/760.pdf |
Underground Swing Arm
This type of operator is used on many of the most upscale gates. The operator is all but invisible, located below grade, leaving the beauty of the gate unencumbered by arms and boxes. The typical installation is a bi-parting gate (2 piece). The DC motor run operators are not strong enough to operate one piece gates over 10’ in length, although there are hydraulic units available that are up to the task. This is not usually an issue because they are used almost exclusively on bi-parting gates.
All of the underground operators use a separate control box which can control 2 operators. Many times when the installation uses column, the control box is flush mounted. To make the installation simpler and increase durability we have custom skeletons available that are embedded in the footing and column that hold the operator, control unit, gate hinges, and lighting. Contact us for more information.
