You have no items in your shopping cart. Add items to checkout.
You're currently on:
DoorKing 6050 1/2HP Swing Gate Operator
Accessories for DoorKing 6050 1/2HP Swing Gate Operator
|
DoorKing 9410-010 Single Channel Loop Detector
|
$150.00
|
|||
|
DoorKing 9409-010 Two Channel Loop Detector
|
$282.00
|
|||
|
DoorKing 2600-770
|
$11.00
|
|
|
DoorKing 2600-225 Gate Test Scale
|
$49.00
|
||||
|
DoorKing 1200-019 Standard Sealed Bearing Hinges
|
$110.00
|
||||
|
DoorKing 1200-009 Flange Bearing Hinge
|
$0.00
|
||||
|
DoorKing 1203-084 Torsion Rod
|
$173.00
|
||||
|
|
DoorKing 2600-664
|
$120.00
|
||||
|
|
DoorKing 2600-260
|
$55.00
|
||||
|
|
DoorKing 2600-220 White Touch Up Paint
|
$32.50
|
||||
|
|
DoorKing 2600-221 Light Gray Touch Up Paint
|
$32.50
|
||||
|
|
DoorKing 2600-222 Tan Touch Up Paint
|
$32.50
|
||||
|
|
DoorKing 2600-223 Charcoal Gray Touch Up Paint
|
$32.50
|
The Model 6050 Swing Gate Operator is designed to operate vehicular swing gates in residential and commercial applications. The unique design of this operator allows the gate arm to be attached to the bottom rail of the gate. This eliminates the need for any brackets to be welded to the face of the gate and creates an aesthetically pleasing installation.
The DKS 6050 Swing Gate Operator is designed to be pad or post mounted to meet almost any installation requirement. A post or pad mount is required for installation, specify mounting method when ordering.
The Dual Model includes both a primary & secondary operator in addition to 40 Ft. of interconnect cable.
The DKS 6050 Swing Gate Operator is designed to be pad or post mounted to meet almost any installation requirement. A post or pad mount is required for installation, specify mounting method when ordering.
The Dual Model includes both a primary & secondary operator in addition to 40 Ft. of interconnect cable.
| Standard Features | • Secondary Operator Includes 40' Interconnection Cable
• Self-adjusting, no maintenance magnetic limits • Overlap feature for dual swing gate operation • Designed with a built-in primary and secondary entrapment prevention system • Ports for plug-in loop detectors • Fail-safe release • Tamper detect circuit • Gate Tracker reporting output provides operator data to access control system* (*DKS systems with card access only) • Programming switches • Built-in reset switch • Built-in power On/Off switch • Class I applications • Compliant with UL 325 and 991. ETL Listed. (Note: To be compliant with UL 325 and industry safety guidelines, additional secondary entrapment prevention devices may need to be installed with this gate operator.) Options: • Heater Kit for Cold Environments • Loop Detector |
| Operation | 1/2 HP Limited Duty Motor |
| Primary Reduction | Pulley / Belt Driving a Worm Gear |
| Power Source | 115 VAC, 60 Hz, 4.3A |
| Max. Gate Weight | 10 Ft. x 400 Lbs Per Gate |
| Max. Operating Speed | Opens 90° in 10 - 12 Seconds |
| Max. Duty Cycle | 10 Cycles Per Hour / Limited Duty |
| Operating Temperature | 10°F to 140°F (12°C to 62°C) (heater kit recommended for colder climates) |
| Dimensions | 13.25"W x 12"H x 23"D - Operator Only - (Actual height is determined by mounting method) |
| Warranty | 5-Year Limited Factory Warranty |
| Brochures | prod_brochures/doorking/6050-6100.pdf |
| Replacement Parts (link) | doorking-6050-replacement-parts.html |
Top Arm Swing Gate Operators
Top arms are the workhorses of gate openers. They are distinguished by heavy steel frames (typically 3/16” to 1/4” steel), large oil immersed gearbox, and drive axle. There is a chain drive between the gearbox and drive axle, chain driven limit switch assembly, and an enclosed box containing the circuit board.
These operators have up to a 20 year lifespan that is mostly maintenance free. They weigh in at 100lbs or more. Other features are quiet operation and the ability to move heavy gates. Top swing arm operators are available with AC or DC motors. Some of the DC units can be run on solar panels.
Bottom Arm Swing Gate Operator
Bottom arm openers are available in light and heavy duty models. Having the arm located at the bottom of the gate is considered by many to be a better look than an arm that is located at the middle of the gate where it is highly visible. Another feature is the top cover can be removed quickly and allows access to all the mechanics of the operator for easy service.
The Doorking models are the fastest cycling units on the market and can open a gate in as little as 6 seconds. The Doorking has only 3 moving parts which contributes to a long and service free life of up to 20 years. Some bottom arm units are very small with the electronics out boarded in a separate enclosure. These units can be directly mounted to columns for a very neat and inconspicuous installation.
Some Doorking models are available with a DC backup feature. The smaller units such as the Viking have a solar powered option.
View parts for DoorKing 6050 1/2HP Swing Gate Operator
