You have no items in your shopping cart. Add items to checkout.
You're currently on:
DoorKing 1150-080 1/2HP Overhead Gate Operator
The 1150 overhead gate operator is designed to operate overhead type vehicular gates mounted on jamb track or jamb type hardware. Overhead gates are typically used in underground parking applications where headroom is minimal. The low profile design and quiet operation of the 1150 makes it ideal for these applications.
| Standard Features | • Direct driven limit nuts
• Ports for plug-in loop detectors • Fail-secure, keyed quick release • Shock mounts • Heavy-duty 3-inch rails • #40 drive chain • Programming switches • Built-in power On/Off switch • Gate Tracker reporting output provides operator data to access control system (DKS systems with card access only) • Class II, III and IV applications only. • Compliant with UL 325 and 991. ETL Listed (Note: To be compliant with UL 325 and industry safety guidelines, a secondary entrapment prevention device(s) is required to be installed with this gate operator. ) Options: • Plug-In Loop Detectors |
| Operation | 1/2 HP Continuous Duty Motor |
| Primary Reduction | 40:1 Wormgear Reducer in Continous Oil Bath |
| Power Source | 115VAC 60Hz 5.4Amp |
| Max. Gate Weight | Up To 14 Ft. High x 25 Ft. Wide Depending Upon Rail Assembly |
| Max. Operating Speed | Opens Approximately 10 In. Per Second |
| Max. Duty Cycle | Continuous Duty |
| Operating Temperature | 10°F to 140°F (12°C to 62°C) |
| Dimensions | 21"W x 10.5"H x 149"- 221"L (Length Based on Rail Assembly) |
| Warranty | 5-Year Limited Factory Warranty |
| Brochures | prod_brochures/doorking/1150.pdf |
