You have no items in your shopping cart. Add items to checkout.
You're currently on:
LiftMaster Mega Arm Sprint Barrier Gate Operator
The MegaArm Sprint and MegaArm Sprint Tower are DC-powered additions to the LiftMaster family of gate operators. Designed with a 24 VDC (1/2HP equivalent) motor, these models provide exceptional speed, making them ideal for parking applications. Constructed with an aluminum alloy chassis, they are corrosion resistant and light enough for one person to carry and install. The heavy-duty motor supports 10,000 cycles per day with an operator speed of 0.9 seconds to open or close.Built-in battery backup provides seamless operation of the gate operator and all DC control and sensing devices in the vent of a power loss.
FEATURES:
• Built-in Radio Receiver - LM312
• Built-in Battery Backup - 24 VDC backup power with regulated 24VDC for accessories
• High torque 24 Volt Permanent Magnet DC motor
• Control Inputs - Full service controller with eight inputs and LED indicators for loops, card reader, radio, etc...
• Reversible arm direction for Right or Left-Handed Operation
• Inherent Obstruction Sensing - Instant Reverse Device (IRD) monitor senses obstructions during motion
• Automatic open of gate arm when power is lost if desired (With 15 sec. delay selection)
• Raise gate input memory will memorize multiple vehicles-ideal for barcode scanners & AVI.
• Ability to STOP arm in close travel if tail-gating is sensed at close loop
• Anti-tail gate alarm-K1 relay can be programmed to trigger a warning device when tail gating is sensed on the close loop
SAMS with “memory” – allows Mega Arm to open a slide/swing gate first then raises arm
• Dynamic Motor Braking - to preserve arm positioning
• Aluminum Alloy Chassis - All rust proof aluminum construction with powder coat baked on enamel
• Molded Polyethylene UV stabilized cover never needs wax or paint
• Direct drive gear reducer eliminates many parts that might otherwise fail
• State of the art MOSFET motor drive technology, NO contactors or relays
• Soft Start and Stop - in open and close travel motions
• Magnetic Sensors - No limit switches to fail-uses magnetic (Hall Effect) sensors to monitor arm position
• Maximum Run Timer (MRT) for motor with anti-tamper protection in closing direction
• Dual Gate Operation - Each unit configurable as master or second operator
• Safe 24 VDC low voltage motor and control wiring
• Led Indicators - LED diagnostic center for easy on-site trouble shooting
• Timer to Close - adjustable from 1-33 seconds with on/off selection
• Transient voltage protection on all inputs
• Capable of being powered by 120 VAC, 230 VAC or UL Listed Class 2 Solar Power
• U.L. LISTED (U.S.), C-U.L. LISTED (CANADA)
• 10 year perforation warranty on cover and chassis with 2 years on electronics and mechanism
FEATURES:
• Built-in Radio Receiver - LM312
• Built-in Battery Backup - 24 VDC backup power with regulated 24VDC for accessories
• High torque 24 Volt Permanent Magnet DC motor
• Control Inputs - Full service controller with eight inputs and LED indicators for loops, card reader, radio, etc...
• Reversible arm direction for Right or Left-Handed Operation
• Inherent Obstruction Sensing - Instant Reverse Device (IRD) monitor senses obstructions during motion
• Automatic open of gate arm when power is lost if desired (With 15 sec. delay selection)
• Raise gate input memory will memorize multiple vehicles-ideal for barcode scanners & AVI.
• Ability to STOP arm in close travel if tail-gating is sensed at close loop
• Anti-tail gate alarm-K1 relay can be programmed to trigger a warning device when tail gating is sensed on the close loop
SAMS with “memory” – allows Mega Arm to open a slide/swing gate first then raises arm
• Dynamic Motor Braking - to preserve arm positioning
• Aluminum Alloy Chassis - All rust proof aluminum construction with powder coat baked on enamel
• Molded Polyethylene UV stabilized cover never needs wax or paint
• Direct drive gear reducer eliminates many parts that might otherwise fail
• State of the art MOSFET motor drive technology, NO contactors or relays
• Soft Start and Stop - in open and close travel motions
• Magnetic Sensors - No limit switches to fail-uses magnetic (Hall Effect) sensors to monitor arm position
• Maximum Run Timer (MRT) for motor with anti-tamper protection in closing direction
• Dual Gate Operation - Each unit configurable as master or second operator
• Safe 24 VDC low voltage motor and control wiring
• Led Indicators - LED diagnostic center for easy on-site trouble shooting
• Timer to Close - adjustable from 1-33 seconds with on/off selection
• Transient voltage protection on all inputs
• Capable of being powered by 120 VAC, 230 VAC or UL Listed Class 2 Solar Power
• U.L. LISTED (U.S.), C-U.L. LISTED (CANADA)
• 10 year perforation warranty on cover and chassis with 2 years on electronics and mechanism
| Operation | 1/2 HP 24VDC Permanent Magnet Motor |
| Max. Arm Length | 8 Feet |
| Primary Reduction | Direct Drive |
| Power Source | 120/230 VAC Or Class 2 Solar Power |
| Battery | Two 12V DC Batteries |
| Max. Operating Speed | Arm Rotates 89° in 0.9 Seconds |
| Battery Backup | Built-In 24VDC Battery Backup |
| Max. Duty Cycle | 10,000 Cycles per Day |
| Operating Temperature | Heater Kit Recommended Below 30°F |
| Warranty | 2-Year Electronics & 10-Year Chassis/Cover |
