You have no items to compare.
Elite RoboSwing Swing Gate Operator
The RoboSwing is Elite's most advanced swing gate operator for single family residences and residential complexes up to 15 units. Designed for super-quiet operation, it can handle up to 250 cycles per day (with plug-in transformer) with gates weighing up to 400 lbs. and up to 16 feet in length. Unlike other systems, the RoboSwing is designed with a “non-scissor action” swing arm to greatly reduce the risk of injury. What’s more, the system features a DC motor with a 12-volt, 7-amp hour battery for dependable operation, even when the power goes out. Plus, this system helps to simplify installation by allowing installers to use low-cost, low-voltage wiring or an optional solar panel for operator use in remote locations.
Standard Features:
• Permanent magnetic 12-volt DC motor
• Modular control board uses LEDs to indicate all input and ouput functions
• Sealed 12-volt, 7-amp battery
• Modular surge suppressor
• Easy gate connection with release handle
• Non-scissor action arm
• Reversing sensor
• Limit switch
• Access door
Standard Features:
• Permanent magnetic 12-volt DC motor
• Modular control board uses LEDs to indicate all input and ouput functions
• Sealed 12-volt, 7-amp battery
• Modular surge suppressor
• Easy gate connection with release handle
• Non-scissor action arm
• Reversing sensor
• Limit switch
• Access door
| Operation | 12VDC Permanent Magnet Motor |
| Primary Reduction | Two Reducers in Oil Bath |
| Power Source | 12VDC |
| Battery | 7 AmpHr 12VDC |
| Max. Gate Weight | 16 Ft. x 400 Lbs |
| Max. Operating Speed | Opens 90° in 15 - 17 Seconds |
| Battery Backup | 50 Cycles |
| Max. Duty Cycle | 250 Cycles Per Day with Elites Plug-in Transformer |
| Dimensions | 28"H x 21"W x 14.5"D |
| Warranty | 3-Year Limited Warranty |
| Brochures | prod_brochures/elite/roboswing.pdf |
Top Arm Swing Gate Operators
Top arms are the workhorses of gate openers. They are distinguished by heavy steel frames (typically 3/16” to 1/4” steel), large oil immersed gearbox, and drive axle. There is a chain drive between the gearbox and drive axle, chain driven limit switch assembly, and an enclosed box containing the circuit board.
These operators have up to a 20 year lifespan that is mostly maintenance free. They weigh in at 100lbs or more. Other features are quiet operation and the ability to move heavy gates. Top swing arm operators are available with AC or DC motors. Some of the DC units can be run on solar panels.
Bottom Arm Swing Gate Operator
Bottom arm openers are available in light and heavy duty models. Having the arm located at the bottom of the gate is considered by many to be a better look than an arm that is located at the middle of the gate where it is highly visible. Another feature is the top cover can be removed quickly and allows access to all the mechanics of the operator for easy service.
The Doorking models are the fastest cycling units on the market and can open a gate in as little as 6 seconds. The Doorking has only 3 moving parts which contributes to a long and service free life of up to 20 years. Some bottom arm units are very small with the electronics out boarded in a separate enclosure. These units can be directly mounted to columns for a very neat and inconspicuous installation.
Some Doorking models are available with a DC backup feature. The smaller units such as the Viking have a solar powered option.
Product Tags
Add Your Tags:
Use spaces to separate tags. Use single quotes (') for phrases.
