You have no items in your shopping cart. Add items to checkout.
You're currently on:
AeGIS 91KCR1000FF Dedicated Line Flush Mount TES
AeGIS 9000 Series utilizes microprocessor technology to provide security as well as convenience to you. It is designed for residential and commercial buildings, military and government sites, industrial facilities, or any location where access control is required. It uses a dedicated phone line and connects to the public telephone network. Authorization for access control is through the telephone line or with the keypad access code or with optional card or a combination of keypad access code and card. The tenants MUST have a telephone to allow remote visitor access.
The system parameters and tenants data will be entered via the keypad and the LCD provides easy display. EEPROM technology is used for AeGIS 9000 Series. The tenant database will not be lost during a power failure.
The system parameters and tenants data will be entered via the keypad and the LCD provides easy display. EEPROM technology is used for AeGIS 9000 Series. The tenant database will not be lost during a power failure.
| Display (Tele) | 2x16 Back-lit Liquid Crystal Display (LCD) |
| Capacity | 1000 Tenants / 1,000 Codes |
| Electrical Requirements | 700mA idle, 900mA operating |
| Power Input | 12VAC/40VA (supplied) or 12VDC/40VA (output reading must be 13.5 - 14.5 VDC) |
| Mounting | Flush |
| Standard Features | • Hands Free System • On site programming via system's keypad, RS232, or dial-up remote programming via Pach & Company software • Programmable DTMF (1-9) tone for remote access • Local access via keypad access code, card, keypad & card or transmitter • EEPROM (non volatile) memory - 1200 event transactions buffer • Backlit two line liquid cyrstal display (LCD) with electronic directory • Supports PBX and Voice Mail • Door sensor input • Built-in modem, RS232 & RS485 • Interface with Pach & Company Satellite Card Reader (SCR9), Satellite Keypad (SK9) & RS-485 Wiegand Reader Controller Module (AWCRM) - Maximum of 32 devices. • 10-time zones, 10-door timers (auto unlock schedules), 16-holidays • Manual Unlock/lock timer 01-98 hours • Programmable talk time 10-240 seconds, extendable to another cycle by pressing # • Programmable relay output contact 04-99 seconds • Programmable second relay as Door Control, Shunt, Alarm Timer or CCTV Switch • Alarm alert beeps and calls the security guard if invalid code has been entered a specific number of times. • Outdoor or indoor use. Options: • 26-bit Wiegand Card Reader & Radio Reader • Postal lock ready • Heater • Battery Backup |
| Operating Temperature | 32°F to 140°F. Humidity 0%-95% noncondensing. Heater is required if the temperature is below 32°F |
| Warranty | 2-Year Limited Warranty |
Residential Telephone Entry
Residential telephone entry units in general offer the most convenience over other entry systems such as stand alone keypads and intercoms. These systems utilize the phones in your home to communicate with people at your gate and to control it. Most of these systems are feature laden. Some of the most used features are:
- Simply intercom and open gate by phone
- Open the gate from a built in keypad
- Double ring (European style) differentiates regular calls on your phone from people wanting to access your gate
- Calls to up to 3 phone numbers from gate. For instance it can call your cell phone and control the gate from anywhere in the world. It can also call a second unit on your property such as a granny unit and the gate can be opened from there
- Momentarily or hold open the gate from any phone in home, or from keypad at the gate
- Time controlled access codes. These access codes are only active certain days and times. This is great for limiting access to workers to only times you specify
- Time controlled gate open. Can hold open gate certain times of day and week
- Hold open the gate for 1 hour. A great way to let a guest enter when you are out of your home temporarily
- Optional built in CCTV camera to see who is at the gate before allowing entrance
Commercial Telephone Entry
Commercial telephone entry units are used primarily when larger numbers of people need to access gates or doors. These units need a dedicated phone line. Many commercial units track and record the user’s activity for enhanced security. These units are ubiquitous in apartment buildings and are used to access the front door from many apartments. Commercial and business parking lots use them frequently to control the parking lot and keep track of who has access.
The higher end of these systems integrates with a computer and can be connected to several gates or doors. Card readers are frequently attached to them. Access data is stored that can track the card holder. Users can be added or deleted at the telephone entry controller or remotely by computer.
