You have no items in your shopping cart. Add items to checkout.
You're currently on:
Securitron BPSH Series Boxed Power Supply - 220V
The Securitron BPSH Series Boxed Power Supply is recommended where an interface with a fire alarm system or battery backup is needed. All BPSH Linear Power Supply models are UL Class 2 listed, allowing for wire runs without the use of conduit from power supply to door or gate.
MODELS:
BPSH-12-1 — 12VDC - 1 Amp
BPSH-12-3 — 12VDC - 3 Amp
BPSH-12-45 — 12VDC - 4.5 Amp
BPSH-12-6 — 12VDC - 6 Amp
BPSH-12-9 — 12VDC - 9 Amp
BPSH-12-15 — 12VDC - 15 Amp
BPSH-24-1 — 24VDC - 1 Amp
BPSH-24-2 — 24VDC - 2 Amp
BPSH-24-3 — 24VDC - 3 Amp
BPSH-24-4 — 24VDC - 4 Amp
BPSH-24-6 — 24VDC - 6 Amp
BPSH-24-10 — 24VDC - 10 Amp
MODELS:
BPSH-12-1 — 12VDC - 1 Amp
BPSH-12-3 — 12VDC - 3 Amp
BPSH-12-45 — 12VDC - 4.5 Amp
BPSH-12-6 — 12VDC - 6 Amp
BPSH-12-9 — 12VDC - 9 Amp
BPSH-12-15 — 12VDC - 15 Amp
BPSH-24-1 — 24VDC - 1 Amp
BPSH-24-2 — 24VDC - 2 Amp
BPSH-24-3 — 24VDC - 3 Amp
BPSH-24-4 — 24VDC - 4 Amp
BPSH-24-6 — 24VDC - 6 Amp
BPSH-24-10 — 24VDC - 10 Amp
| Standard Features | • 1,4 or 8 Separate Output Circuit Breakers (Depending on Model) • Slide Switches Connect or Disconnect Load from Power (Excluding 1 Amp Models) • LED's Monitor Zone Status (Voltage, No Voltage) • Internal Capability of Charging Optional 12 or 24VDC Sealed Lead Acid Backup Batteries while Operating the DC Load (Battery Not Included • Terminals for Fire Alarm Relay Connection Allowing Release of all Devices upon Fire Alarm Activation • Clean, Linear Power for Flawless Operation with all Sensitive Active Electronic Components • UL Class 2 Listed |
| Housing | Rugged Steel Enclosure |
| Connection | Hard-Wired |
| Power Input | 220VAC |
| Output | 12 / 24VDC |
| Out Current | 1 Amp - 15 Amp |
| Operating Temperature | 32°F - 105°F (0 - 40°C) |
| Built-In Battery Charger | 13.5VDC / 27VDC |
| Battery | Sold Separately - Use 12/24VDC Sealed Lead Acid / Gel Cell |
| Warranty | MagnaCare Lifetime Replacement Warranty |
