You have no items in your shopping cart. Add items to checkout.
You're currently on:
Securitron UNL UnLatch Electric Strike
Securitron’s UnLatch is a revolutionary new type of electric strike which eliminates the necessity to perform a routing operation on the door frame for installation.
The motor driven UnLatch also presents a fully concealed appearance on the door which not only enhances the architectural appeal of the installation but improves security over a conventional electric strike as an intruder is less able to determine the type of security device present on the door.
The UnLatch functions with cylindrical dead latches or spring latches and includes a latch status monitoring output which reports when the door is in latched (secure) condition or is open.
Note: UNL requires three wires for operation - continuous positive DC, continuous negative DC, and a trigger input to unlock.
In addition to the standard features of the UnLatch Electric Strike, these options area also available;
FSUNL Option
Allows the UNL to become selectable for either "Fail Safe" or "Fail Secure" operation
Finish Option
The UNL UnLatch is available in three finishes, standard Stainless Steel, Polished Brass or Oil Rubbed Bronze Finish.
The motor driven UnLatch also presents a fully concealed appearance on the door which not only enhances the architectural appeal of the installation but improves security over a conventional electric strike as an intruder is less able to determine the type of security device present on the door.
The UnLatch functions with cylindrical dead latches or spring latches and includes a latch status monitoring output which reports when the door is in latched (secure) condition or is open.
Note: UNL requires three wires for operation - continuous positive DC, continuous negative DC, and a trigger input to unlock.
In addition to the standard features of the UnLatch Electric Strike, these options area also available;
FSUNL Option
Allows the UNL to become selectable for either "Fail Safe" or "Fail Secure" operation
Finish Option
The UNL UnLatch is available in three finishes, standard Stainless Steel, Polished Brass or Oil Rubbed Bronze Finish.
| Current Draw | 12VDC: 40mA continuous, minimum 300mA when operating; 24VDC: 40mA continuous, minimum 200mA when operating. Higher capacity supply (1-3 Amps) is recommended for startup inrush to achieve best operation under pre-load |
| Standard Features | • No cutting or altering of the jamb required!
• Fits standard ANSI 4-7/8" strike cutout • Motorized, no solenoids • Fully concealed installation • Maintains dead-latch function at all times • Continuous duty • Releases under pre-load • Latch status sensor is standard (SPDT) • UL Listed • Available in Stainless Steel, Polished Brass (US03) and Oil Rubbed Bronze (US10B) |
| Electrical Requirements | 12 or 24VDC |
| Operating Temperature | -20°F to +125°F (-29°C to +52°C) |
| Dimensions | 3.375"H x 1.33"W x 1.5"D - Fits Standard ANSI 4-7/8” Strike Cutout |
| Warranty | MagnaCare Lifetime Replacement Warranty |
| Brochures | prod_brochures/securitron/unl-munl.pdf |
