You have no items in your shopping cart. Add items to checkout.
You're currently on:
EMX PRX-320 Stand-Alone Keypad / Proximity Card Reader
| Standard Features | Power Requirements: 12 VDC 500-800 mA
Power Consumption: 90 mA standby / 110 mA activated Relay Contact Rating: 3A /12VDC Power Indicator: RED LED Bar on Constant Key Confirmation: Green LED On while key is depressed Entry Confirmation: Green LED Bar On for set time Entry Denied: Yellow LED flashing Alarm condition: Yellow LED constant Read Range: 5 inches Access: Up to 2000 users by card or 8 user passwords |
| Capacity | 2000 Cards / 8 PIN Codes |
| Output | Relay Contact Rating 3A/12VDC |
| Power Supply | 12VDC 500-800 mA |
| Current Draw | 90 mA Standby / 110 mA Activated |
| Read Range | 5" |
| Indicators (LED) | Tri-State LED |
| Warranty | 2-Year Warranty |
| Brochures | prod_brochures/emx/prx-320.pdf |
Card Readers
Card readers are available in short range (2"-6") or long range (up to 10'). The longer range models use similar technology to that found in a toll booth "Fast Track" transponders. All access cards have a unique access code. If the reading system has that card enrolled, it will grant access privileges.
Stand alone card readers have a built in memory of the cards and are controlled from the reader itself. Most of these types of readers have a keypad located outside or inside the cabinet to enter or delete cards. In general they do not record or track card usage.
Slave card readers are attached to larger systems such as telephone entry systems or door controllers. This type of system frequently connects to a computer where the card usage is tracked. In these systems the telephone entry, door controller, or the computer keeps the data base where users are added or deleted and what access privileges individual cards have.






























